Hello,
I have classic Mobile Phone - Samsung GT-E1050 with screen PIN lock.

www.gsmarena.com/samsu...0-5556.php

Is there a way to bypass the lock ?

Or the only way to read the memory is via the chip-off or JTAG ?  

i think it is supported on z3x box to read all codes .  

JTAG reading works, you can buy an adapter from multi-com.pl if you don't want to deal with a bit of soldering...

Ask the FF user Bolo for details
_________________
Apple passcode unlock + decrypted filesystem dump, Android user locks unlock + physical dump with decrypted userdata partition. We provide our services world-wide, but we reserve the right for choosing which tasks we take and which we deny! 

Thanks for the clue  

Hmm... I didn't know it had JTAG.

Anyway, it is supported by XRY and Cellebrite as well as various flasher boxes.
_________________
Arun Prasannan
CCL-Forensics Ltd. 

Z3X can easily read out the codes from it.

UNLOCK INSTRUCTIONS:
Phone must be powered off!
1. Select correct COM port in 'Port' options.
2. Select connection mode in options ('Flash Mode' or 'TAT Mode') .
3. Press 'Unlock' for direct unlock.
4. Press 'Read Codes' to read security codes.
5. - Flash Mode:
Connect the phone to selected port with UART cable and press 'Power' button shortly,
or just insert cable to phone if you are using auto-ignition cable .
(If you have connection problem, try to push 'Power' button while loader will be sent.)
- TAT Mode:
Connect the phone to selected port with UART cable and press 'Power' button about 3 seconds,
or just insert cable to phone if you are using auto-ignition cable .
Done with Samsung Tool PRO v.34.3